How Commercial Roofing Is Affected By Faulty HVAC | Cooper Roofing Vancouver

beware of the roofing cost when you have a faulty hvac

Your Roof's Integrity May be Compromised if You Have a Faulty HVAC Unit.

Plant and facility managers are typically responsible for a broad range of duties, and a top priority is keeping workers and customers comfortable when inside the building. Multiple HVAC units are found on the roofs of most commercial buildings, where they hum along nicely as they heat and cool the building's interior. As you may have suspected, units of this type can successfully endure the elements, as they are built to run efficiently outside. However, commercial building owners should be aware of the possible risks associated with a faulty unit, and these risks include the potential for roof problems.

Mistakes Made by Technicians

Much can be said for human error, even though most consumers initially believe that the unit itself must be faulty if it is malfunctioning. However, if issues are not identified because a technician is not trained correctly, leaks or other significant problems may develop. A well-trained technician should complete routine maintenance on the unit and inspect it on a regular basis to determine if underlying issues are present. An improperly trained technician may make other mistakes that will ultimately lead to roof problems. These mistakes include damaging the roof by not using walkway pads. It is essential for technicians to walk appropriately when inspecting an HVAC unit, as leaks from punctures can occur otherwise. Fortunately, most commercial buildings have walkway pads that naturally lead a person to the area surrounding the HVAC unit.

The Effect of Pooling and Condensation

If water coagulates around the HVAC unit, it can result in the deterioration of the HVAC's membrane, ultimately causing leaks and other problems. Units that are functioning well continuously vaporize water, allowing the latter to escape into the air. A unit that is not working correctly, however, may allow water to pool within the system. If this occurs, the unit's discharge system may require maintenance or repair. It is also important for the owner of the building to keep interior and drainage lines clean and to flow so that moisture does not affect the roof.

Consequences of Faulty HVAC Unit Installation

There are serious consequences associated with improperly installed HVAC units. Certain building owners find that they must repair the same leaks multiple times, only to discover that the issue ultimately lies with the way the unit was initially installed. Unfortunately, it is only a matter of time until major repairs are needed if the unit was not correctly installed. When installing an HVAC system, it is wise to seek the advice of a reputable commercial roofing contractor to offer helpful tips before and during the installation. Keep in mind; a professional roofing company can provide expert advice about the dynamic between the HVAC unit and the roof itself.

Conclusion

HVAC unit issues are typically frustrating for most commercial building owners. Nevertheless, it is easy to solve or prevent such problems before serious repairs are necessary. Calling an experienced and skilled contractor to perform proper maintenance and repairs on a regular basis is the best way to prevent roof problems and ensure that the HVAC system functions appropriately for many future years.  So for help with HVAC issues on your roof, visit us today at www.cooperroofs.ca for more information.

Roofing Companies Vancouver BC

Cooper Roofing Vancouver
1285 W Broadway #600,
Vancouver, BC V6H 3X8
(778) 773-3124

 

The Benefits of Torch-On Roofing Systems in Vancouver

Torch on roofing is also known as a Torch Down roofing system. This type of roofing system is made up of two layers of modified asphalt that’s melted together using a torch. Torch on roofing systems is ideal during wet seasons or in wet areas, e.g., Vancouver because they are waterproof and resistant to ultraviolet light of the sun. The base layer of the roof is either attached with adhesives or mechanically using screws with the cap sheet having a granulated surface to protect the roof.

These types of roofing systems are mainly used for flat roofs which can facilitate rain or snow to collect on the roof. It's waterproof property guarantees that no water will seep from your roof even if snow has accumulated on the roof. The roof covers the entire roof with an even thickness of about 3-4 mm. To facilitate resistance to the UV rays of the sun, a thermos fusible plastic is melted both on the bottom face of the cap sheet and the top surface of the base sheet.

Types of Torch on Roofing

There are two types of a torch on roofing systems: two-layer system and three layer system. A two-layer system is made up of a smooth base ply and a granular surface only as the cap sheet. On the other hand, a three-layer system composition is similar to a two-layer system with the only added layer being an asphalt recovery board. As a result of the combined asphalt board, a three-layer system is handy and hence lasts longer.

Benefits of Torch on Roof

1. Waterproof

Torch on roofing system consists of either 2 or 3 layers depending on the method you choose. The roof is waterproof regardless of the prevailing conditions.

2. Durability

Besides being waterproof, the roofing system lasts long (15 – 20 years) with few or no repair or maintenance practices required. However, it is recommended you hire a professional roofer to inspect your roof from time to time to be sure that the roof is in its perfect condition.

3. Affordable

With minimal or no maintenance costs required, most homeowners are now installing Torch on roof systems. This has made this type of roofing system accessible, and hence most roofers are offering installation services at an affordable cost to most people.

Maintenance

Regardless of the type of roof, you install, or the materials used in roofing, having regular maintenance is recommended to keep the roof in perfect condition and increase its lifespan. You can carry out maintenance practices yourself or hire an experienced roofer room time to time to check your roof. During maintenance, remove any debris that may have build-up on your roof and have your roof resealed every five years to keep it waterproof. Finally, when carrying out inspection, check areas around the chimney, gutters and flashing because they are prone to breaking down and require to be repaired. Hiring a roofer is the best option because he knows where to inspect, what to do and how to fix any problem.

Installation

If you are planning to install a torch on roof system, you don’t have to remove your existing roof if it’s in a decent condition. However, if your current roof is worn out, you need to remove it to avoid future problems after installing a torch on a roof. Torch on installation process requires skills and knowledge on how to use a blowtorch among other tools used during installation. Therefore, you need to hire a professional roofer who has the materials and skills necessary because if not done correctly, the torch can cause massive damages. The blowtorch used during installation can harm the person using it. Also, it can damage the structure being roofed causing more loss. Therefore, you are advised to hire a roofer and avoid doing yourself if you don’t have the skills and experience needed.

A layer of fiberglass felt is nailed to the roof to cover it. The fiberglass felt is used as the base sheet where roofing materials are joined. A layer of bitumen is then rolled out onto this base layer, and a blowtorch used to melt it so that it can adhere to the base. To get a good seal, bitumen is pressed down and rolled out evenly throughout the roof. A primer is first used to seal metal flashings around vents, chimneys, etc. before covering them with a roofing layer. The roof is left to settle for a few months before having additional coat applied to make the roof resistant to wear and tear, fire and water.

Roofing Vancouver, BC

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124
https://cooperroofs.ca

Why Roofing is Something You Should Never DIY

Roofing is for sure a dangerous task when you decide to handle it without an experience. However, most homeowners still choose to do the job themselves without having an idea of what a right roofing task entails. Note that if you are one of these DIYers, you might end up spending more, even if your goal was to save some money.

Even worse, you might damage your property or end up hurting yourself, which can leave you paying for unplanned expenses. To avoid dealing with these situations, it is best that you deal with a professional roofer when you want to repair or replace your roof. There are several other reasons to support this statement, and covered below are these reasons, keep reading and eliminate the doubt of whether or not to hire a roofer.

1. Experience

Let's face it. A professional roofer will always be ahead of you regarding roofing experience despite the number of hours you spend researching this task. The reason behind this is that you will focus on research once or twice, only when you need to do a roofing in your home. However, a professional roofer does this task every day, meaning that he/she garners new knowledge about this work on a daily basis. Even better, these people have thoroughly studied what it takes to do a right roofing task and even got the license to prove that they can do this task. As such, you will rarely face accidents after hiring these persons, while you can stay guaranteed of a good outcome.

2. Benefit from insurance

Do you have insurance that will cover your injuries in case of a roofing accident? Unless you are a roofing contractor, the chances of having such an insurance policy are minimal. This means that you will have to meet all expenses once an accident occurs. To avoid such losses, it is worth getting a professional roofer who has the insurance to protect your property, yourself, after an accident during the roofing of your home. This assures you that if the roofer or your property get damaged during the roofing task, the insurance held by him or she will help get you covered hence no additional obligations on your part.

3. Save money

Another plus of hiring a professional roofer is that you will save more. This point is contradicting keeping in mind that you will need to spend to pay for labor, but the fact is that you will end up paying less in the long run. There are several reasons to support this, the first being that the roofer will get high-quality materials at a discounted price, then when you opt to get them yourself. Secondly, a professional will give the best results when it comes to a roofing task, thereby giving the assurance that you will not have to replace or repair your roof any sooner than needed. What's more, is that they know when to repair or replace, to enable you to spend the exact amount that will yield the best results. Hence, you will get a quality job done and that which you will not have spent a lot, unlike when you decide to do it yourself.

4. Save time

Hiring a professional roofer will save much of your day. The reason behind this is that these experts do this task without wasting any time, meaning that they know what to do, when, and how. As such, you can be sure to have them do a perfect job at a fraction of the time you would have spent struggling with the task. Therefore, this will leave you with a lot of time to concentrate on what you are good at, helping you earn an extra income rather than concentrating on something you are not so sure about.

I hope that you now have an idea why hiring a professional roofer is a better deal as opposed to doing a roofing task yourself. In the long run, you will note that these people are worth your money. So, be sure to hire a professional roofer, and enjoy a healthy and durable roof.

Vancouver Roofing

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124
cooperroofs.ca/

Picking The Best Shingle Color For Your Home | Cooper Roofing Vancouver

There are many roofing options available, so it can be a challenge to choose the right one. Not only can you choose between metal, slate or asphalt shingles, but there are color and theme choices too! Given that you need to live with your roof for 20 to 30 years, it is a good idea to pick the right color and shade combination. When it comes to selecting the colors for your roof, there are a few things you need to consider.

Dark or light colors

There are general questions regarding dark and light color materials when it comes to heat retention. Studies have found that when plywood sheathing is used under black shingles, they are ten degrees warmer than when white shingles are applied. When grey or brown shades are used, there was little difference in heat retention discovered. Ideally, you want to pick a color that you are going to be happy with for a long time.

Don't ignore the brick

You can always paint shutters or walls, but your blocks will stay one color. When choosing roofing colors, it is wise to select a shade that compliments the bricks. Start with a few samples and then you can see how those matches fit with your siding or paint colors.

Exterior paint matters

When the theme of your house is not an issue, you may decide to change the colors of your home. In this instance, be sure to match a new paint color to your shingle samples. The best way to do this is to get a 2-by-6 foot board painted with your chosen color and lay the board next to your roofing material selection.

Add dimension to your roof

It is a common mistake to choose a roof color that almost perfectly matches the siding or brick. What you end up with is a monotone looking house with no character. Avoid a lifeless appearance and pick colors for your roof that compliment the siding rather than match it.

Tone down the exterior

If your house is starting to look multicolored and busy-toned, you will want to choose shingles with more toned-down colors. If there are too many patterns and colors, onlookers will be overwhelmed, but a toned down, more gentle appearance, is welcoming and boosts curb appeal.

Remember lighting

Before picking a final shingle option, be sure that you have looked at it both in the sun and the shade. You want to view the shingle next to the brick and siding while all are in direct sunlight, and then wait to recheck the sample when the house is shaded. You want all exterior house colors to blend in all lighting.

Consider resale value

You need to remember that just because you like a bold brightly colored roof, does not mean that everybody else will. If you ever plan to sell your house, it is best to choose a neutral shingle color to protect resale value. There have been cases where potential buyers love a house's location and interior but have walked away because of a roof. However, if you plan to stay put, then a bold roof color can make a statement and add character.

Vancouver, BC Roofing

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124
cooperoofs.ca

Why Roof Inspections & Maintenance Should Be Done Frequently

As you walk through a house, it is easy to find minor problems as you look in each room and around the yard. What is not so easy is figuring out the condition of the house based on appearances alone. Full replacement of a faulty roof can cost you between $2000 and $12,000, but on the surface, it looks beautiful. The only way to be sure is to schedule an inspection.

Not all sellers will agree to pay an inspection fee, but you absolutely must have one done before you decide to purchase a home. It is better to know up front what repairs are needed so you can factor them into any pricing negotiations.

The Process

Roofing inspections are designed to locate any potential problems as well as estimate the remaining life. Inspectors look at the angles of the roof to determine how long water will take to evaporate. Ideally, an evaporation rate should be no more than two days. Inspectors also walk across the entire roof to check for weakened areas. Every inch of a roof needs to be corrected even those that are hard to reach. A good inspector will use binoculars if an area is unsafe. All construction materials are evaluated, and inspectors consider the time of construction, any replacements, and the material’s natural deterioration rate.

Potential Problems

If any problems are identified, you are allowed to request to see them. The most commonly found problems during roof inspections are:

• Loose or broken materials
• Blistered, curled or split shingles
• Improper air conditioning or swamp cooler installation
• Rusty metal
• Shingle pieces in the rain gutters
• Loose or corroded flashing
• Sagging between rafters
• Depressions near vent pipes
• Clogged Drains

 

Roofing Contractors

When installing roofing, it is recommended to get at least three different contractor quotes. You want to be able to compare the estimates as well as the materials that will be used by each contractor and labor roofing costs. Check out consumer reviews and ratings of the contractors you are interested. If you know anybody, who has used them previously, get their opinion. Gathering this data beforehand will let you know what to expect.

Before the Work Starts

If your inspection uncovers that roofing repairs are needed you need to make sure you also check the chimney before any work begins. The idea is to coordinate the work between the mason and roofing contractor so that their work will not interfere with what the other is doing. Timing and space issues are better resolved when they work together, so the repairs of one job do not detriment the other. This will only end up costing you more.

Maintenance and Upkeep

Once you have a new roof installed or the repairs are complete, you need to ensure you take care of it. Schedule certified inspections every two years. There are so many factors that can affect the life of a roof so depending on your location; reviews may need to be more often. The factors you need to take into account include severe weather damage, repeated exposure to direct sunlight and insulation issues. One side of your roof may be more vulnerable than the other, so make sure inspectors are aware of this and schedule their visits accordingly.

Roofers Vancouver, BC

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124

The Primary Factors Influencing The Cost of Roof Repair in Vancouver

 

When it comes time to repair or replace your roof, you are not only facing a time-consuming process but if care is not taken, it can also be more expensive than necessary. The money needed will depend on the amount of restoration required. Be sure that a roofing contractor does not give a quote until he has inspected the roof from inside and outside the home. Once this is done, there are a few things you need to consider when it comes to the regular price of roof installation and repairs.

Type of Roof

The type of roof you have has a significant impact on the level and cost of repairs that will be needed. Houses can have sloped or flat roofs, high or low pitch and metal or shingle. The materials required for specific roof types vary and therefore so will your overall cost. More expensive materials and more labor-intensive work will cost you a lot more. Asphalt shingles are the least expensive to repair and install charging about $120 per 100 square feet, and slate shingles will cost you $800 to $1000 per 100 square feet. If you have a metal roof, you should expect to pay the most (close to $1500 per 100 square feet).

Repair Permits

Roofing repairs can be impacted by the town or city you live in because the roofer may need to pull permits to get the job done. Permit pricing can be a flat rate or might vary depending on the size and value of your home. Some coastal areas are known to have separate permits for hurricane and tropical storm protection. Additional materials such as hurricane bracing are required and can add several hundred dollars to your total cost.

The scope of the Repairs

The overall price of the job is mostly impacted by the extent of the required repairs. Most roof repair contractors will determine the rate based on square footage of the roof. Their pricing is based per square, which equals a 10-foot square area. Shingles, for example, are sold by the square, so you will be charged for the whole square even if the repairs area is less than 10 feet. Contractors will usually leave you with the scraps in the event your roof needs repair again in the future.

Water Damage

Water is the most destructive element to a house’s structure. Often, water damage can be hidden and may not be noticed until the roofer removes the shingles. If the decking underneath is determined to have water damage, be prepared for additional expenses. As costly as it may be, this is not something you want to overlook. Untreated water damage can destroy the entire roof, requiring total roof replacement. That is much more expensive than the repairs you avoided.

Additional Structures

Skylights and chimneys are common on roofs, along with other unique items. As attractive as they may be, they do raise the price of any roofing jobs. Depending on the damage, these structures may also need replacing. Ideally, you want to coordinate the repair jobs, so they do not interfere with each other. Your roofer can initially be the one to check for leaks and damage to these structures if you ask. Even if they are intact, roofers still need to work around them, which make labor more tedious, and therefore, expensive.

Before you start repairs, be sure to get estimates from at least three different roofing contractors. They can vary significantly across companies, but the one thing you should always look out for is exceptionally low quotes. This could be a sign that the roofer is not certified or perhaps does not perform the most quality work.

Vancouver Roofing Company

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124

Checking the Credentials of a Roofing Contractor in Vancouver BC

Getting a new roof is a significant investment and will cost you a couple of thousand dollars. It is a decision that needs to be carefully considered and researched given the importance of the roof to the house structure. It is essential to ensure that quality installation is performed, which means

you need to take care when selecting a roofing company. Roofing repairs are the most common of any home repairs, so there is no shortage of companies to choose from. The problem is that not all of them offer the same quality, reliability or skill levels, so it is critical that you check credentials before hiring a roofing contractor.

It is easy to locate a roofing company; just check the Yellow Pages or the Internet to get lists and lists provided. Establishing a quality and trustworthy roofer is a different matter. The roofing of your home is essential, so you need to ensure you hire an experienced and licensed worker with an excellent track record. The first thing you can do is speak with friends, family, and co-workers to see if they have any recommendations. Going off the experiences of trusted friends is an excellent way to narrow the search. When you have a shorter list of options, the next thing to do is verify their qualifications.

Licenses and Insurance

Most companies will have permissions to perform services, but not all of them are insured for liability. Worker’s compensation is mandatory, but you want to confirm that your potential roofer also carries additional insurance coverage. Here at Cooper Roofing Vancouver, you can be sure that we bring the best insurance and workers compensation to protect you from potential liability charges.

Permits

Every aspect of construction requires permits so be sure that your roofer is experienced in getting these. Sometimes, licenses can be expensive, and not many homeowners are familiar with them or how

Much they cost. You want to find a company that will openly and honestly discuss permit requirements with you so you can factor them into your costs. The last thing you want is a contractor throwing in surprise charges at the last minute.

Warranty

A manufacturer's warranty covers material costs, but the roofer’s labor is not included. Check if your roofer offers any warranty on their job. Ideally, you want to work with someone who will provide an assurance for at least ten years after the roof installation.

Stability

A good sign of trustworthiness and reliability is a length of time in the industry. A company that has stood the test of time and has repeated and the regular business is someone you want to work with. Any company that has been serving a community for years or even decades is likely to have a solid reputation. With how quickly word of mouth gets around, you can be sure that an unreliable roofer will be well-known. It is difficult for them to get business once this happens, so they do not stick around for long. A company that has been around for more than twenty years will have the experience and qualifications you need and will deliver a roofing service worth the time and money you invested.

Vancouver BC Roofing Company

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124

Storm Damage and Your Roof: Affects, Costs, & Solutions | Cooper Roofing Vancouver

Many radars can tell you that a storm is coming, but it cannot show you the damage that the wind will do to your roof. There is not too much you can do to protect a roof from a storm, but there are some things to keep in mind if damage does occur.

It is not easy to assess the damage to the roof after a storm. Small repairs may be needed, or the entire roof may have to be replaced. It is best to have a professional roofing contractor come in and assess the damage inflicted to the roof.

Storm Damage and Your Roof

Wind, hail, falling trees, and rain can cause damage to your roof. These are the most common elements that damage roofs. Wind can blow the shingles off of the roof, leaving it open to water damage. Water can get into the underlayment and leak into the home. Even a small number of missing shingles can allow water into the house. Nailing a shingle back in place does not always solve the problem. The individual shingles may need to be replaced, or the roof may need to be replaced depending on the number of missing shingles.

If the shingles have blown off during the storm, the underlayment must be checked. If not corrected, there may be additional problems in the future. The number of shingles that have blown off will determine if a repair or replacement is needed. Water damage and the age of the roof will also assist in resolving this.

Hail that hits the home can remove the granules from the shingles. The granules protect the home from UV rays. If shingles are prematurely damaged, they may crack and may blow off the roof.

The fewer the granules on the shingles, the lower level of protection from UV rays the roof is receiving. The roof will also age quicker and will need to be replaced sooner. Insurance adjusters can look at the roof, and there is a formula to determine if hail has caused enough damage where the roof will need to be replaced.

Insurance companies also vary when it comes to covering the cost of repairs, or deciding if the entire roof needs to be replaced. There is a unique formula that they use that can determine the rate at which the hail was hitting the roof and the amount of damage that it caused.

Falling trees can damage the roof. The tree can make a hole in the roof, allowing water and wind to get inside of the home. If the damage is only partial, the areas affected can be rebuilt. If the impact from the tree goes beyond visible damage, water may have gotten into the home, causing a more significant issue.

Pieces of the tree can continue to fall onto the roof even after the initial impact. The entire tree may land on the roof, so it is better to be safe and leave home until everything is settled.

Rain alone will not cause a significant amount of damage to the roof unless there is also a problem in the structure of the roof. There are some things to be aware of to detect interior water damage after a storm. You may not notice right away that shingles are missing, and that water is slowly making its way into the home.

By the time you notice the water damage, there may be additional issues. If the roof has a history of water damage issues due to poor quality installation, then replacement or repairs may not be covered.

Assessing the Damage

The most common type of damage from a storm is leaking water. Go to the attic and check this out. Look for damp spots on the ceiling and check the insulation to see if it is moist. Many leaks are not broad enough to notice.

A trip to the attic can help the homeowner find other issues as well. Be sure to contact a roofing contractor is anything looks out of place.

Tarping the Roof

If a storm is expected, the most important thing that a homeowner can do is to put a tarp on the roof. Many home supply stores have roofing tarps. If the tarp is not big enough for the entire roof, place it over the spots that are damaged. This will help prevent the amount of damage done to the roof.

You will need to make sure the tarp is secure. Edge the entire perimeter of the tarp with two by four boards and nail them onto the roof. Since the damage areas will need to be repaired anyways, the nails will not hurt it.

It is recommended to nail the boards down and not just the tarp. This will provide additional protection to the roof.

Working with a Roofing Contractor

After a storm, calling a roofing storm damage restoration company can be frustrating. They are often busy, and it may take several weeks to get an appointment. Storm damage keeps contractors very busy. If the roof is damaged, you need to tarpit to prevent further damage to the home until a contractor can come out and fix it.

At this time you also need to contact your insurance company adjuster and take pictures of the damage and the damage it is causing to the rest of your home. Do not answer to any random person that comes to your door and offers to fix your roof right away. There is a chance they can be skilled, but more than likely they are shabby contractors that will leave your roof in worse shape than when you started.

These fly by night contractors often don't take responsibility for the work they do and leave town as soon as the project is over. They are less likely to provide quality work, and you may not even be able to contact them down the road if there is a problem.

Roofing Company Vancouver

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124
https://cooperroofs.ca/

Your Complete Guide To Maintaining Your Vancouver Asphalt Shingle Roof

Replacing a roof is a significant investment and will be a big construction project.

The roofer will help the homeowner protect their new roof or existing roof by providing maintenance services on a regular basis. This can ensure that the roof is getting the proper protection. Some roofing maintenance tips will help make sure that the roofers cover everything that is necessary during this inspection. If you own your home, you will learn what to expect when a roofing professional comes to service your room.

Asphalt Roofs

Asphalt is one of the most popular materials that are used in roofing. According to recent data, four out of five homes in the United States have asphalt shingles. These roofs look great, are easy to take care of, and will stand up to weather conditions.

How does a roof become damaged?

Roofs deal with a lot of and get more wear than any other areas of the home. Some things that ceilings are exposed to include :

  • Exposure to natural elements including sunlight, wind, rain, snow, etc.
  • Growth of biological materials including algae and plant debris
  • Poor installation
  • Poor quality maintenance or repairs
  • Changes in the building such as increase humidity or improper ventilation

Why take care of your roof?

Even if there are no visible signs of damage, homeowners need to have their roof inspected. Protecting the roof may prevent future damage and may avoid expensive repairs in the future.

A roofer can assist the homeowner by doing routine maintenance on the roof twice a year, or after any significant storms. These storms include ice storms or significant events such as a tornado or a hurricane.

Roof Maintenance Checklist

For any roofing inspections or repairs be sure to contact a licensed roofing contractor.

1. Housekeeping

Removing debris from the roof and roofing systems is essential. Check out the shingles, the eavestroughs, downspouts, skylights, chimneys, and other ventilation systems.

Here is what to look for:

From the ground, the homeowner should look for any leaves, branches, or other debris on foot. A leaf blower may be used to clean off the roof.

To reduce the amount of debris that can build up on the roof, remove any vegetation that may be hanging over it. A licensed contractor should be contacted to handle this.

Using a trowel, dig out the leaves and other material that has collected in the gutters. This will allow the water to flow down the spouts properly.

Eaves protectors can also be installed. These are metal meshed grates that will prevent organic matter from building up in the drains.

Be sure that all of the downspouts are clear and water can flow from the roof away from home. Be sure to check for leaks or drips that occur after it rains. They should be reported to the contractor when the roof is being inspected.

2. Roof Inspection

Once the roof is cleaned off, the inspector will look for any issues. The roof should be checked once in the fall and again in the spring. This will allow the roofer to make notes of anything odd and make small repairs if needed.

The roofer will become familiar with the condition of the roof and will be able to detect any issues. This will help catch any potential problems early before they become a big deal.

Be sure to have the ventilation system checked. It may need some repairs or may need a good cleaning.

3. Repairs

A professional roofing contractor should complete any asphalt shingles repairs to keep the roof in excellent condition. Small maintenance can prevent future issues.

The contractor may replace shingles that are damaged or broken. They may also return missing shingles, roofing cement or roofing nails can be used to repair cracked shingles. Some shingles may even need to be replaced.

Maintenance of an Asphalt Shingle Roof

Replacing or installing valley flashing: Valley flashings may need to be replaced if they are cracked, corroded, or are not holding in place.

Replacing Other Flashings: roofing cement or nails may be used to replace the flashings around the chimney, vents, or other areas where it is in need of repair. Copper or galvanized steel has to be used around bricks because the motor may corrode the flashing.

Repairing Gutters or Downspouts: the roofer may need to caulk or fix a gutter if the eavestrough or downspout is leaking. If they are sagging the contractor will need to work to determine the right pitch for proper drainage.

4. Record Keeping

Professional roofing contractors must keep formal records of all the inspections and repairs they do to their client’s roofs. This data collection will help make sure that all safety practices are used, and everything is done according to code.

Residential roofing contractors need to make sure the roof on their client’s home is in good shape. Some recommendations can help keep the roof safer, and allow it to last longer.

Keep a Log: A roofer should note any potential issues during the roof inspection such as rust or shingle issues. While it may not be a problem at the time, the roofer needs to check on it during the next review to make sure the problem did not get worse. The roofer then needs to consider if anything needs to be done to repair it. They should keep a log of any work done to the roof. This will help the roofer and the homeowner remember what sections need to be replaced, and any materials that may be necessary. This will also create a history for the homeowner. This can help contractors as well as future homeowners to see the work that has been completed.

Take Pictures: the roofer should take pictures of the roof as well as the drainage systems. This will allow them to measure any potential problems and check it over time. These photos will allow the roofer to determine if the warranty may cover the specific problem.

A healthy roof is a well protected home

If you are looking to maintain the life of your roof or if you are a roofing professional that wants to educate your clients on the importance of roofing repair schedule a roof inspection. It will be well worth it.

Roofing Company Vancouver, BC

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124
https://cooperroofs.ca

How To Temporarily Repair A Leaking Roof | Cooper Roofing Vancouver

Repairing a roof under these circumstances can be difficult and dangerous if the roof is leaking currently or there is an approaching storm. Saving this problem for later can be done right now if one stops the water flow.

Caution; before starting any repairs or maintenance, you should read safety information. Especially when it is wet, it is dangerous to be working on a rooftop.Without proper safety measures, you should avoid climbing on the roof. During an electric storm do not work on the roof or do anything wrong.

Stopping a leak would not be done just by placing something over the spot where the hole is. One aims at a point upslope, away from the leak where stormwater is not able to reach the barrier.It will be satisfactory placing a barrier over the surface if upslope is a peak. In order not to blow away, the trick will be secure.

Temporary Roof Coverings

Covering the roof works in the short term. There are different types of materials on can use. For brief coverage, the trick is securing the material in place. Readily available in the blue tarp is the article favored when temporarily covering a roof. To ensure the tarps in place, grommet holes across the edge allows for tie-downs through the tarps are tough.

Holding in place is the problem, but most people have successfully used the thin plastic films.
Using something not easily movable for example, heavy trash cans, or a tree and anything else solid and heavy keeps them in place you may fasten reading rope through the grommets on a tarp. Heavy wind can lift the tarp like the sail. A 20-pound weight seems heavy enough to hold down a tarp. However, that pressure can be turned into a deadly club by a gust of wind.

Getting the tarp on the roof without climbing the roof can be done in some ways. Tying a light string onto a tennis ball and throwing the ball on the roof is one way. On the tarp, tie the string to the lash ropes and pull the ropes to the house. Once in the desired position the lines and the tarp can be drawn into place. There is a risk causing damage, for example, injuring a person or pet, or breaking a window anytime you throw something over the house. To avoid creating an accident, you should take necessary safety steps when repairing your roof in Metro Van.

Wet Patch material for fixing a leak

Damp patching material can be used on a damp surface, and it seals immediately. Wet patch material is used to seal around roof vents, skylights, chimneys, and to secure loosened asphalt shingles. You can repair safely if you know where the water is leaking.

For best results, the wet patch is used together with reinforced glass. For scooping and spreading the material a disposable putty knife and disposable rubber gloves can be used because of the mess. Working on a wet roof is highly hazardous and is not recommendable.

Roofing Companies Vancouver

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(778) 773-3124
cooperroofs.ca/