3 Common Winter Roofing Problems To Watch Out For | Cooper Roofing Vancouver

Winter weather can be very hard on your roof. This is especially true if you live on the East Coast in places like New England, Delaware, and Pennsylvania. If you don’t pay attention, several roofing issues can creep up on you. Without the necessary immediate care, these small problems can lead to significant, very costly roofing repairs.

In this article, you will learn about the normal damage that can occur on roofs from ice dams, condensation, and gutter issues caused by icicles. Below are three of the most common issues your roof may face during the winter. The sooner you recognize these problems, the sooner you can call professional roofers or building contractors.

to avoid problems its best to hire a professional roofing contractor and save money


Problem #1 Condensation

Condensation occurs when a cold surface comes into contact with the warm air. If your attic is not insulated correctly, condensation can form. This can result in the growth of mold and mildew, which can damage the interior structure of your home. The best way to keep this from happening is to have your attic properly insulated and ventilated.

Although it is often overlooked, attic ventilation is critical to the health of your roof. When the attic is adequately ventilated, it can control the temperature indoors, and it can save you money on your energy costs. If your attic is not adequately ventilated, it can cause damage to the roof. It can also create ice dams with can reduce the lifespan of the roof.

Problem #2 Ice Dams

Ice dams occur when ice and water accumulate on the roof under the shingles. They are also a very common problem for roofs during the winter. Ice dams form when the upper area of your roof is at above-freezing temperatures, and the lower regions that hang are below-freezing. When the sow from the upper, warmer section of the roof starts to melt, it will flow down and then refreeze on the colder part of the roof and gutters. This creates the damaging ice dams. As the snow continues to melt from the top of the roof, it can back up and pool behind the ice dam. In time, it can leak into your home through the joints and cracks in the exterior of the roof. This can cause damage inside the house.

Ice dams can cause water damage to the home. Sadly, there is no way to prevent ice dams from forming. However, they can be minimized. If you have adequate roof insulation, a good attic ventilation system you can protect your roof from ice dams. When your attic is adequately ventilated, it will keep your roof at a stable temperature, even on freezing days. This will allow the ice to melt without causing any damage to the roof and without needing to call a roofing company.

Another way to protect your roof is to clean it entirely after a snowstorm. This will keep ice dams from forming. It will also protect your shingles from damage resulting from the weather.

Problem #3 Icicles

Icicles form in the same way that ice dams do. On sunny days when the temperatures are freezing, the water will drip from the roof and freeze. Clogged gutters and downspouts will also cause icicles. Depending on the size of the icicles, they can be very dangerous for people and animals below. If the icicles are very heavy, they can damage the roof and the gutters.

To keep icicles from forming on the roof, you should make sure that your gutters are free of twigs, leaves, and other debris. When the weather warms up, you should check your gutter health. If they require any maintenance, you should contact your roofing and gutter contractor at www.cooperroofs.ca. This will prevent any leaking issues when the spring rains arrive.

Vancouver Roofers

Cooper Roofing Vancouver
1285 W Broadway #600,
Vancouver, BC V6H 3X8
(604) 674-0319


The Benefits of Torch-On Roofing Systems in Vancouver

Torch on roofing is also known as a Torch Down roofing system. This type of roofing system is made up of two layers of modified asphalt that’s melted together using a torch. Torch on roofing systems is ideal during wet seasons or in wet areas, e.g., Vancouver because they are waterproof and resistant to ultraviolet light of the sun. The base layer of the roof is either attached with adhesives or mechanically using screws with the cap sheet having a granulated surface to protect the roof.

These types of roofing systems are mainly used for flat roofs which can facilitate rain or snow to collect on the roof. It’s waterproof property guarantees that no water will seep from your roof even if snow has accumulated on the roof. The roof covers the entire roof with an even thickness of about 3-4 mm. To facilitate resistance to the UV rays of the sun, a thermos fusible plastic is melted both on the bottom face of the cap sheet and the top surface of the base sheet.

Types of Torch on Roofing

There are two types of a torch on roofing systems: two-layer system and three layer system. A two-layer system is made up of a smooth base ply and a granular surface only as the cap sheet. On the other hand, a three-layer system composition is similar to a two-layer system with the only added layer being an asphalt recovery board. As a result of the combined asphalt board, a three-layer system is handy and hence lasts longer.

Benefits of Torch on Roof

1. Waterproof

Torch on roofing system consists of either 2 or 3 layers depending on the method you choose. The roof is waterproof regardless of the prevailing conditions.

2. Durability

Besides being waterproof, the roofing system lasts long (15 – 20 years) with few or no repair or maintenance practices required. However, it is recommended you hire a professional roofer to inspect your roof from time to time to be sure that the roof is in its perfect condition.

3. Affordable

With minimal or no maintenance costs required, most homeowners are now installing Torch on roof systems. This has made this type of roofing system accessible, and hence most roofers are offering installation services at an affordable cost to most people.


Regardless of the type of roof, you install, or the materials used in roofing, having regular maintenance is recommended to keep the roof in perfect condition and increase its lifespan. You can carry out maintenance practices yourself or hire an experienced roofer room time to time to check your roof. During maintenance, remove any debris that may have build-up on your roof and have your roof resealed every five years to keep it waterproof. Finally, when carrying out inspection, check areas around the chimney, gutters and flashing because they are prone to breaking down and require to be repaired. Hiring a roofer is the best option because he knows where to inspect, what to do and how to fix any problem.


If you are planning to install a torch on roof system, you don’t have to remove your existing roof if it’s in a decent condition. However, if your current roof is worn out, you need to remove it to avoid future problems after installing a torch on a roof. Torch on installation process requires skills and knowledge on how to use a blowtorch among other tools used during installation. Therefore, you need to hire a professional roofer who has the materials and skills necessary because if not done correctly, the torch can cause massive damages. The blowtorch used during installation can harm the person using it. Also, it can damage the structure being roofed causing more loss. Therefore, you are advised to hire a roofer and avoid doing yourself if you don’t have the skills and experience needed.

A layer of fiberglass felt is nailed to the roof to cover it. The fiberglass felt is used as the base sheet where roofing materials are joined. A layer of bitumen is then rolled out onto this base layer, and a blowtorch used to melt it so that it can adhere to the base. To get a good seal, bitumen is pressed down and rolled out evenly throughout the roof. A primer is first used to seal metal flashings around vents, chimneys, etc. before covering them with a roofing layer. The roof is left to settle for a few months before having additional coat applied to make the roof resistant to wear and tear, fire and water.

Roofing Vancouver, BC

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(604) 674-0319

Why Roofing is Something You Should Never DIY

Roofing is for sure a dangerous task when you decide to handle it without an experience. However, most homeowners still choose to do the job themselves without having an idea of what a right roofing task entails. Note that if you are one of these DIYers, you might end up spending more, even if your goal was to save some money.

Even worse, you might damage your property or end up hurting yourself, which can leave you paying for unplanned expenses. To avoid dealing with these situations, it is best that you deal with a professional roofer when you want to repair or replace your roof. There are several other reasons to support this statement, and covered below are these reasons, keep reading and eliminate the doubt of whether or not to hire a roofer.

1. Experience

Let’s face it. A professional roofer will always be ahead of you regarding roofing experience despite the number of hours you spend researching this task. The reason behind this is that you will focus on research once or twice, only when you need to do a roofing in your home. However, a professional roofer does this task every day, meaning that he/she garners new knowledge about this work on a daily basis. Even better, these people have thoroughly studied what it takes to do a right roofing task and even got the license to prove that they can do this task. As such, you will rarely face accidents after hiring these persons, while you can stay guaranteed of a good outcome.

2. Benefit from insurance

Do you have insurance that will cover your injuries in case of a roofing accident? Unless you are a roofing contractor, the chances of having such an insurance policy are minimal. This means that you will have to meet all expenses once an accident occurs. To avoid such losses, it is worth getting a professional roofer who has the insurance to protect your property, yourself, after an accident during the roofing of your home. This assures you that if the roofer or your property get damaged during the roofing task, the insurance held by him or she will help get you covered hence no additional obligations on your part.

3. Save money

Another plus of hiring a professional roofer is that you will save more. This point is contradicting keeping in mind that you will need to spend to pay for labor, but the fact is that you will end up paying less in the long run. There are several reasons to support this, the first being that the roofer will get high-quality materials at a discounted price, then when you opt to get them yourself. Secondly, a professional will give the best results when it comes to a roofing task, thereby giving the assurance that you will not have to replace or repair your roof any sooner than needed. What’s more, is that they know when to repair or replace, to enable you to spend the exact amount that will yield the best results. Hence, you will get a quality job done and that which you will not have spent a lot, unlike when you decide to do it yourself.

4. Save time

Hiring a professional roofer will save much of your day. The reason behind this is that these experts do this task without wasting any time, meaning that they know what to do, when, and how. As such, you can be sure to have them do a perfect job at a fraction of the time you would have spent struggling with the task. Therefore, this will leave you with a lot of time to concentrate on what you are good at, helping you earn an extra income rather than concentrating on something you are not so sure about.

I hope that you now have an idea why hiring a professional roofer is a better deal as opposed to doing a roofing task yourself. In the long run, you will note that these people are worth your money. So, be sure to hire a professional roofer, and enjoy a healthy and durable roof.

Vancouver Roofing

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(604) 674-0319

Your Complete Guide To Maintaining Your Vancouver Asphalt Shingle Roof

Replacing a roof is a significant investment and will be a big construction project.

The roofer will help the homeowner protect their new roof or existing roof by providing maintenance services on a regular basis. This can ensure that the roof is getting the proper protection. Some roofing maintenance tips will help make sure that the roofers cover everything that is necessary during this inspection. If you own your home, you will learn what to expect when a roofing professional comes to service your room.

Asphalt Roofs

Asphalt is one of the most popular materials that are used in roofing. According to recent data, four out of five homes in the United States have asphalt shingles. These roofs look great, are easy to take care of, and will stand up to weather conditions.

How does a roof become damaged?

Roofs deal with a lot of and get more wear than any other areas of the home. Some things that ceilings are exposed to include :

  • Exposure to natural elements including sunlight, wind, rain, snow, etc.
  • Growth of biological materials including algae and plant debris
  • Poor installation
  • Poor quality maintenance or repairs
  • Changes in the building such as increase humidity or improper ventilation

Why take care of your roof?

Even if there are no visible signs of damage, homeowners need to have their roof inspected. Protecting the roof may prevent future damage and may avoid expensive repairs in the future.

A roofer can assist the homeowner by doing routine maintenance on the roof twice a year, or after any significant storms. These storms include ice storms or significant events such as a tornado or a hurricane.

Roof Maintenance Checklist

For any roofing inspections or repairs be sure to contact a licensed roofing contractor.

1. Housekeeping

Removing debris from the roof and roofing systems is essential. Check out the shingles, the eavestroughs, downspouts, skylights, chimneys, and other ventilation systems.

Here is what to look for:

From the ground, the homeowner should look for any leaves, branches, or other debris on foot. A leaf blower may be used to clean off the roof.

To reduce the amount of debris that can build up on the roof, remove any vegetation that may be hanging over it. A licensed contractor should be contacted to handle this.

Using a trowel, dig out the leaves and other material that has collected in the gutters. This will allow the water to flow down the spouts properly.

Eaves protectors can also be installed. These are metal meshed grates that will prevent organic matter from building up in the drains.

Be sure that all of the downspouts are clear and water can flow from the roof away from home. Be sure to check for leaks or drips that occur after it rains. They should be reported to the contractor when the roof is being inspected.

2. Roof Inspection

Once the roof is cleaned off, the inspector will look for any issues. The roof should be checked once in the fall and again in the spring. This will allow the roofer to make notes of anything odd and make small repairs if needed.

The roofer will become familiar with the condition of the roof and will be able to detect any issues. This will help catch any potential problems early before they become a big deal.

Be sure to have the ventilation system checked. It may need some repairs or may need a good cleaning.

3. Repairs

A professional roofing contractor should complete any asphalt shingles repairs to keep the roof in excellent condition. Small maintenance can prevent future issues.

The contractor may replace shingles that are damaged or broken. They may also return missing shingles, roofing cement or roofing nails can be used to repair cracked shingles. Some shingles may even need to be replaced.

Maintenance of an Asphalt Shingle Roof

Replacing or installing valley flashing: Valley flashings may need to be replaced if they are cracked, corroded, or are not holding in place.

Replacing Other Flashings: roofing cement or nails may be used to replace the flashings around the chimney, vents, or other areas where it is in need of repair. Copper or galvanized steel has to be used around bricks because the motor may corrode the flashing.

Repairing Gutters or Downspouts: the roofer may need to caulk or fix a gutter if the eavestrough or downspout is leaking. If they are sagging the contractor will need to work to determine the right pitch for proper drainage.

4. Record Keeping

Professional roofing contractors must keep formal records of all the inspections and repairs they do to their client’s roofs. This data collection will help make sure that all safety practices are used, and everything is done according to code.

Residential roofing contractors need to make sure the roof on their client’s home is in good shape. Some recommendations can help keep the roof safer, and allow it to last longer.

Keep a Log: A roofer should note any potential issues during the roof inspection such as rust or shingle issues. While it may not be a problem at the time, the roofer needs to check on it during the next review to make sure the problem did not get worse. The roofer then needs to consider if anything needs to be done to repair it. They should keep a log of any work done to the roof. This will help the roofer and the homeowner remember what sections need to be replaced, and any materials that may be necessary. This will also create a history for the homeowner. This can help contractors as well as future homeowners to see the work that has been completed.

Take Pictures: the roofer should take pictures of the roof as well as the drainage systems. This will allow them to measure any potential problems and check it over time. These photos will allow the roofer to determine if the warranty may cover the specific problem.

A healthy roof is a well protected home

If you are looking to maintain the life of your roof or if you are a roofing professional that wants to educate your clients on the importance of roofing repair schedule a roof inspection. It will be well worth it.

Roofing Company Vancouver, BC

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(604) 674-0319

How to Add Years of Life to Your Vancouver Roof and Save Money


Being from the west coast, we are blessed with beautiful snow capped mountains and lush green forests all around. On the other side of the spectrum, you can probably count the number of days it’s not raining with one hand in the winter season. We have been dubbed the “wet coast” and become accustomed to the weather.

However, our roofs take a beating through the seasons. They are relentlessly slammed with massive amounts of rain through the fall and winter. Once spring hits, they think the suffering is over. A sigh of relief is taken to celebrate a victory, but then summer approaches. The blazing heat tests the many shingles and preys on any exposed asphalt and aged cedar. Over the years, moss and algae begin to spawn and flourish on your roof. They move in and invite their friends to join the party.

Once these green patches grow to a certain size, they have the potential to bond to the shingles, and if they are removed, sections of granules may come along with them. The problem is the ceramic coated granules protect the asphalt layer from UV rays. Once the asphalt is exposed to the elements the lifespan of your roof is significantly decreased. If the left is, moss retains moisture and accelerates the deterioration process on your shingles.

Most shingle manufacturers provide a 10-year warranty on algae resistance. The shingles are treated with algicide which helps fight off the growth of algae for about ten years. Once the algicide has worn away, your roof is open season for a free-for-all of algae spores to collect. Once the algae have fought its way through the limestone, it begins to dislodge granules and expose the asphalt.

Now you must be thinking, what can I do? Well, you can be a friendly Canadian and let the baby fungi grow up to be significant and robust adult fungi, or you can take action.

If you enjoy doing it yourself and are brave enough to set up a ladder and walk along your roof, there are various roof cleaner products on the market that can be used to fight moss, algae, and mildew. If you feel more comfortable on the ground, seek out a professional roofing contractor in your area to provide an assessment and maintenance plan for your roof.

These products can be applied to your roof every 1-3 years and fight off existing moss, mildew, and algae while helping with future prevention. Some sprays can be attached directly to your garden hose and have a long range like Spray & Forget or you may need to purchase a light duty sprayer which will not affect the integrity of your roof. Make sure any products used are environmentally friendly, biodegradable and NOT filled with any toxic chemicals such as chlorine or bleach. These can damage your shingles, gutters and kill gardens. High-powered pressure washers can remove granules on asphalt shingles and the treatment on cedar shakes. They also have potential to penetrate behind or under metal flashing, and vents so stay clear of using these to clean your roof.

Maintaining your roof isn’t just about bragging to the neighbors about how pristine your roof looks. Regular roof maintenance will add many years of life to your roof and save you thousands of dollars in the long run.

Roof Repair Vancouver BC

Cooper Roofing Vancouver
1285 W Broadway #600, Vancouver, BC V6H 3X8
(604) 674-0319